POLYCHEM 7576-M-60 is a long oil soya alkyd designed for applications with higher viscosity requirements than 6350-M-60. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).
Characteristics
Specifications
Percent Non Volatile
59.0 to 61.0
Viscosity
X-Z
Acid Number
0.0 to 10.0
Gardner Color
7.0 Maximum
Weight Per Gallon
7.75
Solvent
Mineral Spirits, Low Aromatic
Cure Method
Air Dry
Modifier
Oil
Soya
Reduced Viscosity
G-I at 50 NVM
Reduction Solvent
Mineral Spirits, Low Aromatic
Clarity
Clear to slightly hazy
Suggested Uses
Architectural enamels/ Exterior trim paints/ Porch & deck finishes
Drier Recommendations: (% metal on total binder solids)
Cobalt Calcium Zirconium
0.05% 0.05% 0.30%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
