POLYCHEM 7575-M-60 is a vinyl toluene copolymer for fast drying economical finishes. This is POLYCHEM 7563-V-60, but cut in mineral spirits for improved brushability. This product is low-HAP and can be formulated into HAP-free coatings (below 1% HAP).
Characteristics
Specifications
Percent Non Volatile
59.0 to 61.0
Viscosity
X-Z
Acid Number
0.0 to 8.0
Gardner Color
5.0 Maximum
Weight Per Gallon
7.50
Solvent
Mineral Spirits
Cure Method
Air Dry
Modifier
Vinyl Toluene
Oil
Linseed
Reduced Viscosity
Reduction Solvent
Clarity
Clear to slightly hazy
Suggested Uses
Equipment enamels/ Floor sealer
Drier Recommendations: (% metal on total binder solids)
Cobalt Manganese Zirconium
0.05% 0.03% 0.50%
The information and specifications stated here are for the material currently offered, are subject to change without prior notice, and due to variations in user handling and application methods should not be relied upon without testing under user conditions. The supplier makes no warranty of any kind, express or implied, concerning this product or its use either singly or in combination with other substances. User assumes all risks incident to its use. User must communicate to employees and customers all warnings that relate to the potential exposure to this product. The user assures that workplace and disposal practices are in compliance with laws, regulations and ordinances. ALL WARRANTIES, INCLUDING WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED. IN NO EVENT SHALL THE SUPPLIER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
